NSK S-Max M500L Manual De Operación página 4

2. The power source uses a SELV circuit for electricity supply.
3. The output voltage of the power source is within the range recommended by the manufacturer of this product.
1. Specification
M500KL/M500SL/
M500L
Model M500
M500WL/M500BL
Head Type
Miniature Head
Rotation Speed 380,000～450,000min
0.20MPa (2.0kgf/cm )
2
0.25MPa (2.5kgf/cm
Drive Air Pressure
~0.25MPa (2.5kgf/cm )
2
Chuck Type
Burs
Friction Grip Short/Standard Shank
-
Optic Glass Rod Glass Rod
Voltage -
-
Activate Voltage
Consumption
-
2
current
M500WLED M600KL/M600SL/
M500K M600
M600L
M500BLED M600WL/M600BL
Standard Head
-1 360,000～430,000min
0.20MPa (2.0kgf/cm )
2
) ~0.3MPa ( 3.0kgf/cm )
2 2 0.25MPa (2.5kgf/cm
~0.25MPa (2.5kgf/cm )
2
Push Button Chuck
Size: ISO1797-1 Type3 ø1.59~1.60mm
Friction Grip Standard Shank
- White LED Glass Rod - Glass Rod
AC/DC
-
3.3±0.05V
-
2.8 - 4.0 V
0.38A Typical
-
(3.3V)
2. Connection / Disconnection to the Coupling
First make sure the manufacturer's coupling is firmly attached to the handpiece tubing and
the drive air pressure is correct.
CONNECTION (Fig.1)
M600WLED
M600K
M600BLED
To connect the handpiece to the coupling align the handpiece to the coupling and push
together (per the coupling manufacturers instructions).
-1
DISCONNECTION (Fig.1)
) ~0.3MPa (3.0kgf/cm )
2 2
Release the handpiece from the coupling (per the coupling manufacturers instructions) and
remove the handpiece.
NSK COUPLING : Pull back Connector Ring to release the handpiece.
- White LED
AC/DC
3.3±0.05V
2.8 - 4.0 V
0.38A Typical
(3.3V)
Handpiece
Connector Ring
NSK Coupling
Fig. 1
3