Stopping The Engine - TOYAMA TM6AFS Manual Del Usuario

Adjusting the friction screw
The throttle friction regulator is on the rudder lever, which provides adjustable resistance
to throttle grip movement, and can be adjusted according to operator preference.
To increase the resistance, turn the adjustment clockwise. To decrease the resistance,
turn off the time adjuster. When constant speed is desired, press the adjuster to maintain
the desired throttle setting.
ATTENTION:
Do not overtighten the friction regulator. If there is too much resistance, it may be difficult to
move the throttle lever, which could result in an accident.

8 STOPPING THE ENGINE

NOTE:
Before switching off the outboard, allow it to cool for a few minutes at low speed or at low
speed. Stopping it immediately after intense use of high speed and speed can damage the engine.
PROCEDURE
Press and hold the outboard stop button until it is completely off.
19