Important - Arctic King ARF18MW2 Manual Del Usuario

through cabinet liner. Align water valve bracket with factory drilled holes. Use a power drill
with a Phillips® head bit to drive the two self drilling screws (4) through bracket and into
cabinet.
16) Connect wiring harness to water valve. Make sure connec on is ght.
17) Push plas c water supply tubing into bo om of water valve as far as it will go. Finger ghten
nylon compression nut onto threaded end of water valve. Tighten another one half turn with
wrench. DO NOT over ghten.
18) Secure plas c water tubing to rear of cabinet with two plas c clamps (9).
NOTE：Clean back of cabinet with a commercial household cleaner, ammonia or alcohol
before applying clamps.
2.9 Connec ng Ice Maker to Water Supply
Unplug the refrigerator. To eliminate the danger of electric shock during installa on, you must
unplug the refrigerator from its electrical outlet.
IMPORTANT: Ensure that your water supply line connec ons comply with all local plumbing codes.
11