Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Controls:
LIGHT
BLOWER
SWITCH
PILOT
SWITCH
I
/
The hood is operated using the slide controls under the
hood canopy.
The light switch turns the lamps on and off.
The blower
switch
:makes it possible to select the motor
operating speed. Position 0: motor off.
The pilot lamp lights up whenever the blower is on.
WARNING: To reduce the risk of electric
shock, disconnect
from power supply before
cleaning.
Grease filters
Clean frequently using hot water and a mild detergent or
in your dishwasher. The aluminum mesh filters should
be washed approximately every month depending on the
amount of usage. Wash more often if your cooking style
generates greater grease - like frying foods or wok
cooking.
GREASE
FILTER
LIGHT BULBS
WARNING: To reduce the risk of electric
shock, disconnect
hood from power supply
before changing
bulbs.
Non-ducted
charcoal filters
1. Ductfree filter kit (B03300487) is included.
2. Position the two (2) non-ducted charcoal filters over the
blower.
3. Rotate to lock filters in place.
FILTERS
Stainless
steel
hood surfaces
Stainless steel hoods should be washed regularly with a
clean cloth, warm water and mild soap or dish detergent.
Clean in the direction of the polish lines. Rinse well with
clear water and wipe dry immediately. You may wish to
apply light oil used for furniture polishing to emphasize
it's bright finish.
To change bulbs:
1. Remove the screw securing the light fitting.
2. Pull down tens to remove.
3. Replace with light bulbs of the same type. CAUTION: BULB
MAY BE HOT!
This range hood requires two (2) 40-watt light bulbs (included).
4

Publicidad

loading

Este manual también es adecuado para:

233.50363200