Transport And Storage; General; Transport - Sera MU-100 E 1500.2 Manual De Instrucciones

Electric agitator
MU-...E(G)1500...
Operating instructions

3. Transport and storage

3.1 General

Prior to shipment, sera products are checked for proper condition and functioning.
The products are packed according to the transport conditions. The system is transported horizontally.
After receipt, the product must be checked for transport damage. Any damage is to be reported immediately to the
responsible carrier and the supplier.
The mixing unit should only be transported using suitable means of transport or hoists. Take into account the weight
of the mixing unit and the carrying capacity of the means of transport.
INFO!

3.2 Transport

WARNING!
DANGER!
Do not carry the mixing unit at the shaft.
■
Carry the mixing unit at the motor flange/motor.
■
Carry the mixing unit in an upright position.
■
Do not load the shaft in a way that will cause it to bend.
■
TA 452 Rev. 4 en 03/2015
The packaging material must be properly disposed of !
The accident prevention regulations must be observed when transporting and
maneuvering the unit.
Turn off the power supply and prevent it from being turned on again!
In case of contact with live components there is a danger to life.
Switched on electrical components may cause uncontrolled movements and lead
to serious injuries.
Subject to technical modifications!
41
www.sera-web.com