Certificate Of Non-Objection - Sera MU-100 E 1500.2 Manual De Instrucciones

Electric agitator
MU-...E(G)1500...
Operating instructions

15. Certificate of non-objection

Inspection / repair of machines and machine parts is only carried out after the op-
posite clearance certificate was filled in correctly and completely by authorized and
qualified personnel.
NOTE!
All industrial companies are obligated by the legal provisions for occupational health, e.g. the workplaces ordinances,
the Ordinance on Hazardous Substances, the regulations for prevention of accidents and the environmental protection
regulations such as the Waste Management Act and the German Household Water Act to protect their employees or man
and the environment from detrimental effects when handling hazardous substances.
Should special safety precautions be necessary despite careful draining and cleaning of the product
the necessary information are to be provided.
Machines which are operated with radioactive media shall only be inspected and/or repaired in the safety area
of the owner by a sera employee.
The clearance certificate is part of the inspection-/repair order.
sera reserves the right to refuse acceptance of the order for other reasons.
Please make a copy and leave the original with the oeprating instructions!
(can also be downloaded from: www.sera-web.com)
NOTE!
56
www.sera-web.com Subject to technical modifications!
TA 452 Rev. 4 en 03/2015