Installing The Appliance - SonicWALL SonicWave 432o Guía De Inicio

For your safety, follow all instructions listed in this section.
 Install in a location away from direct sunlight and sources of heat. A maximum ambient temperature of
140º F (60º C) is recommended.
 Route cables away from power lines, fluorescent lighting fixtures, and sources of noise such as radios,
transmitters, and broadband amplifiers
 The included power cord(s) are approved for use only in specific countries or regions. Before using a power
cord, verify that it is rated and approved for use in your location.
 Ensure that no water or excessive moisture can enter the unit.
 Allow unrestricted airflow around the unit and through the vents on the side of the unit. A minimum of 1
inch (25.44mm) clearance is recommended.
 Consideration must be given to the connection of the equipment to the supply circuit. Appropriate
consideration of equipment nameplate ratings must be used when addressing this concern. Do not
overload the circuit.
 This product is not intended to be installed and used in a home or public area accessible to the general
population. When installed in schools, this equipment must be installed in a secure location accessible only
by trained personnel.
 This device is not intended for use at workplaces with visual display units, in accordance with §2 of the
German ordinance for workplaces with visual display units. To avoid incommoding reflections at visual
display workplaces this device must not be placed in the direct field of view.

Installing the appliance

Safety and Regulatory Information
4