Initial Use - Beurer BARBERS CORNER HR 4000 Instrucciones De Uso

Attachments

7. Initial use

You can operate the device with the battery as well as the supplied mains adapter.
Battery operation
In order to be able to operate the device with the battery, fully charge the battery for 60 minutes prior to
initial use. The operating life of the device is approx. 60 minutes when it is fully charged.
To charge the battery, proceed as follows:
1. Ensure that the device is switched off.
2. Connect the mains adapter to a suitable socket.
3. Plug the other end of the mains adapter into the connection socket on the under-
side of the device. The charge indicator now begins to flash. The battery indicator
shows you the current battery state in percent.
4. Once the charging process is complete, pull the mains adapter out of the socket
and the device. The device is now ready for use.
Quick charging
If you have forgotten to charge the shaver before use, the quick-charge function helps. Connect the
device to the power supply for this purpose. The device will be ready for a complete shave using bat-
tery operation within 5 minutes.
Mains operation
To operate the device with the supplied mains adapter, proceed as follows:
1. Connect the mains adapter to a suitable socket.
2. Plug the other end of the mains adapter into the connection socket on the underside of the de-
vice. The battery indicator shows you the current battery state in percent and the charge indicator
begins to flash. The mains adapter supplies enough energy to charge the battery and operate the
device at the same time.
Long comb
attachment
Suitable for cutting
lengths of 15-27 mm
(3-mm increments).
Short comb
attachment
Suitable for cutting
lengths of 1-12 mm
(3-mm increments).
21
Comb attachment
for slim contour blade
Suitable for cutting
lengths of 1 mm,
3 mm and 5 mm.
The comb attachment
for the slim contour
blade can only be
used with the slim
contour blade attach-
ment.
Slim contour blade
attachment
Suitable for precise
contour styling.