Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL INSTRUCTIONS.-
Carefully read through all of the
instructions contained in this manual
before using the treadmill. It provides
you with important information about
safety, use and maintenance.
1 Make sure that the treadmill unit
operates correctly before attempting to
use it. Never use an appliance that
might be faulty.
2 This unit has been designed for
home use only.
3 Place your unit on a flat surface, with
at least 2 metres of free space at the
rear. Place a protective sheet below
your unit to protect the floor or carpet
from possible damage.
4 Parents and/or those responsible for
children must always be aware of their
curious nature and how this can often
lead to hazardous situations and
behaviour
which
accidents. This is why they should
always
be
supervised.
circumstances should this appliance be
used as a toy.
5 Your unit can only be used by one
person at a time. It can only be used by
people who weigh 100Kg or less.
6 Use the handrail to help you get on
and off the treadmill.
7 Keep your hands well away from any
of the moving parts. Do not place your
hands, feet or any other object below
the treadmill belt.
8 Use suitable clothing and footwear.
Make sure that all laces/cords are tied
correctly.
To
unnecessary wear on the belt, make
sure that your footwear is not dirty.
English
could
cause
Under
avoid
injury
9 It is not advisable to keep your unit in
a damp place for long periods as it will
be prone to rust.
10 Make sure not to overlubricate the
unit as this might stain the floor or
carpeting where the unit stands.
ASSEMBLY INSTRUCTIONS.-
The assistance of a second person
is advisable for the assembly work.
Take the unit out of its box and make
sure that all of the pieces are there
Fig.1:
(1) Main structure; (3) Bottom support
with wheels; (4) side bar (left); (5) Side
bar (right); (18) Side bar base cover
(Left)
brackets; (20) Monitor; (43) Knob; (S5)
Allen key 5mm; (26) Flat washer M-8;
(28) Allen screw M-8x40; (31) Screw
M-6x15; (36) Self-locking nuts M-8;
(40) Screw M-5x20; (45) Screw M-
5x10.
Follow the instructions step by step to
no
assemble:
1. Put the frame (1) on the floor Fig.2.
Lift the side rails (2) of the frame and
tighten them with the round knobs (43)
Fig.3.
2. Insert the support with wheels (3)
into the bottom
sidebars (2) Fig.4. Secure using
screws (28) along with the washers
(26) and nuts (36).
The bolts (46), at the bottom must also
be tightened fully Fig.4A.
and
3. Next insert the end of handlebar (4)
into handlebar (5), as shown in Fig.5,
and fix together using screw (31).
10
and
(Right);
sections
(19)
Monitor
of
the
Publicidad
