Description Of The Appliance - ARIETE 4137 Manual De Instrucciones

DESCRIPTION OF ThE APPlIANCE

A Safety cap
B Safety cursor
C Steam push button
D Handle
E On light
F Nozzle
G Appliance body
H Funnel
INSTRUCTIONS FOR USE:
How to fill the boiler tank before use
NEvER uNsCREW tHE sAFEtY CAP (A) BEFORE HAvING CHECKED tHAt tHE APPlIANCE
Is uNPluGGED FROM tHE POWER sOCKEt.
- Unscrew the safety cap (A) and overturn the boiler tank to drain it completely.
- Fill the boiler tank (figure A) with a measure (H) full of water by means of the funnel (L).
- Screw the safety cap (A) on again.
Appliance functioning
- To switch the appliance on, plug it in; the appropriate light (E) will go on. Steam will be ready in 3/4
minutes.
- To avoid the accidental activation of steam, move the cursor (B) from left to right ( ). To unlock,
move the cursor (B) from right to left ( ), Fig. C.
- For steam supply, press the appropriate button (C), after having moved the safety cursor (B) to the
left (Fig. C). Release the button (C) to stop steam supply.
- When using the appliance for the first time, direct the steam jet into a container to remove any
water residue in the pipe (any water leakage is caused by the steam condensation inside the pipe).
Repeat the above operation also after few minutes of standstill. Anyway, when the nozzle begins
to supply steam, always direct the jet toward the floor.
ATTENTION: When the appliance is not used, always lock the steam push button via the
apposite safety cursor (B).
APPlICATION OF ThE ATTAChMENTS
Straight nozzle:
fully insert the attachment by pushing it against the appliance fixed part, making sure the pin on the
joint fits perfectly into the relevant slot on the nozzle. Turn according to the direction indicated by
the arrow (clockwise) on the nozzle; in this way, the attachment remains fixed in the central locking
position (Fig. B).
Round brush and bent nozzle:
Both attachments can be applied both on the straight nozzle (Fig. D) and on the nozzle (Fig. E), by
inserting them on the hexagonal end according to the required angle.
I Round brush
L Measuring cup
M Bent nozzle
N Straight nozzle
O Flexible hose
P Brush for fabric
Q Squeegee
R Cloth
- 11 -
EN