ARIETE grati PROFESSIONAL 448 Manual De Instrucciones página 11

Appliance reassembly
Before using again, assembly the appliance as follows:
- with the lever (G) raised, insert the hopper (I) onto the shaft (E) of the power base and turn it
forwards, anticlockwise, to lock it into place (Fig. 8);
- insert the roller (L) onto the shaft (E) and then fit the cap (M) and lock it into place by turning it
anticlockwise (Fig. 9);
- insert the container (A) under the hopper (I) so that the side tab fits perfectly into the lock slot (D)
(Fig. 10) and press it until it clicks into place on the rear lock (F) (Fig. 11).
Note: The container (A) can be inserted from either side.
IMPORTANT: Before use, make sure that all parts are fitted correctly, otherwise the appliance will
not operate.
- 9 -
EN