Broan PM300SS Instrucciones De Instalación, Uso Y Cuidado página 9

PREPARE THE CABINET (
7 . Measure the distance between both bottom bracket
edges (F) (FIG . 9) . The table below shows the appropriate
distance needed .
U n
nit arrow edge
PM300SS From 19-3/8"
to < 19-9/16"
BBN1243SS From 21-7/8"
to < 22-1/16"
BBN1303SS From 27-7/8"
to < 28-1/16"
If the measured distance needs to be shortened, screw two
no . 8-32 x 1/4" machine screws, in each bottom embossed
cabinet brackets hole; this will slightly bend the bottom part
of the brackets (FIG . 10) . Screw both brackets until the
appropriate distance is obtained .
BBn1243SS BBn1303SS
and
8 . There are 3 different sizes of filler included with these
units, designed to fit up to 13-in . depth cabinets . For up
to 15-in . depth cabinets, another set of 4 fillers is available
(for BBN1243SS unit: HADTBN24, for BBN1303SS:
HADTBN30) . Choose the filler that fits to cover the back
bottom edge of the cabinet . Use 4 no . 6 x 3/4" truss head
wood screws (included) to mount it (FIG . 11) .
CAUTION
Never use an electric screwdriver or drill to screw the
filler to the bottom edge of cabinet; use a standard
screwdriver .
' )
cont d
w
ide edge
F F
From 19-9/16"
to 19-13/16"
F F
From 22-1/16"
to 22-5/16"
F F
From 28-1/16"
to 28-5/16"
:
unitS only
F
HD1376
Screws in bottom
embossed holes
F
HD1377
HD1373
FIG. 9
FIG. 10
FIG. 11
9