Publicidad
Idiomas disponibles
Idiomas disponibles
Transport and storage
Danger
Store the device always unloaded,
without any cartridge strip and pin!
Store the device and the cartridge strips of the genu-
ine tool box on a safe, dry and heat-proof place.
Unauthorized persons, in particular children, may
not get access to the device or to cartridge strips.
The tools and the loading features may only be
transported in its original package!
Cleaning and maintenance
It is essential to carry out maintanance works regu-
larly to ensure proper and safe operation.
You do not need any tools to reassemble the
■
device.
Do not use mere force. Check the device for
■
proper functioning without inserted pin after
reassambly.
Warning
Wear protective gloves.
Warning
Never dismantle the device with car-
tridges inserted.
Cleaning
Clean the housing outside with a damp cloth.
■
Do not use aggressive cleaning agents and care
products. We recommend to use Würth plastic
cleaners and Würth plastic care products.
Remove heavy soiling (dust etc.) using com-
■
pressed air.
Disassamble the device and clean it with com-
■
pressed air and a brush.
During cleaning and maintenance
work, always use your personal safety
equipment such as protective glasses,
gloves and breathing mask.
18
Assembly (fig. III)
Warning
It is vital that you mount the brake ring
[7] as shown in the picture and tighten
the union nut [2] properly.
Mount piston [1], piston buffer [6], brake ring
■
[7], piston return spring [8], pin guide [5] and
attachment sleeve [3].
Replace the piston return spring [8] in case of
■
reduced firing power.
Screw on the union nut [2] and tighten manually.
Ensure that the white triangles are at the same height
(symbol ▹◃ fig. II).
Use only genuine Würth accessories and
spare parts!
Accessories and spare parts
In the unlikely event of a failure or defect, have it
repaired by a Würth masterService workshop. In all
your queries and spare part orders, always quote
the product number (see type plate) of your device.
Designation (fig. III - V)
Piston [1]
Union nut [2]
Piston buffer [6]
Brake ring [7]
Piston return spring [8]
Pin guide [5]
Attachment sleeve [3]
Buffer [4]
Retaining ring [9]
Piston for
insulation plate anchor [1.1]
Pin guide for
insulation plate anchor [5.2]
Attachment sleeve for
insulation plate anchor [3.2]
Pin guide for
narrow profiles [5.1]
Attachment sleeve for
narrow profiles [3.1]
Compressed air spray
Round brush Ø25mm
Prod. no.
0707 864 357
0707 864 352
0707 864 359
0707 864 360
0707 864 358
0707 864 353
0707 864 350
0707 864 355
0707 864 356
0864 050 001
0864 050 002
0864 050 003
0864 050 004
0864 050 005
0839 62
0707 864 319
Publicidad
