Toparc 064621 Manual De Instrucciones página 11

TRANSPORT TROLLEYS (LIFT TROLLEYS)
Wrong handling of the transport trolleys!
Falling equipment or parts can lead to serious personal injury!
• Transport may only be carried out by qualified or supervised personnel!
• Lift the unit sideways with the largest possible fork spacing!
• Do not carry any other loads at the same time (e.g. protective gas cylinders, people, tool boxes, wire spools, etc.)!
• Avoid lifting and depositing the load in a jerky manner!
USE IN ACCORDANCE WITH SPECIFICATIONS
Non-compliant use can result in danger!
Non-compliant use can endanger people, animals and property. No liability will be assumed for any damage
that may result from this!
• The unit may only be operated in accordance with the regulations and by a trained or qualified person!
• Under no circumstances may the unit be modified or altered in any way that is not in accordance with the regulations!
INSTALLATION – PRODUCT OPERATION
Only qualified personnel authorised by the manufacturer should perform the installation of the welding equipment.
DESCRIPTION
Thank you for choosing GYS In order to get maximum satisfaction from your trolley, please read the following carefully:
The pallet trolley is suitable for handling generators up to 125kg. Depending on requirements, it can be equipped with 4 swivel castors with brakes
to facilitate movement on the ground and 4 sling rings.
COMPATIBILITES
The trolley is compatible with the following generators:
• EXAGON/GENIUS 400
• TITAN 400
• TITANIUM 400
• MULTIWELD 250T-C / 320T-C
• NEOPULSE/PULSEMIG 320C / 400 G / 500 G
• PLASMA CUTTER 85A / 125
TROLLEY DESCRIPTION (FIG. I)
1- Pallet trolley
2- Swivel wheels
3- Lifting eyes
4- Mounting brackets
5- Ream beam support
SIMPLE ASSEMBLY
1
PALLET TROLLEY
16 screws M8x16
16 serrated nuts M8
EN
11