Rebel RB-1001 Manual Del Usuario página 48

Warning: The work light is intended to illuminate the power tool's
direct area of working operation and is not suitable for other purposes.
Spindle lock function
The power tool is fitted with an automatic spindle lock feature. When the
ON/OFF switch (5) is not pressed, the chuck (1) rotation is locked. Now it
is possible to use the screwdriver (even when the battery is empty) as a
manual tool.
The power tool is equipped with electronic overload protection
function. When the power tool gets overloaded it will shut down
automatically. When this happens, please wait for at least 5
seconds to let the overload protection reset itself.
MAINTENANCE
Before cleaning and maintenance, always switch off the power
tool and set the rotation direction switch to the middle position.
Clean the casing regularly with a soft cloth, preferably after each use.
Make sure that the ventilation openings are free of dust and dirt. Remove
very persistent dirt using a soft cloth moistened with soapsuds. Do not
use any solvents such as gasoline, alcohol, ammonia, etc. Chemicals
such as these will damage the synthetic components.
Clean the power tool before storing. Store the power tool, user manual
and accessories in the original packaging. Store the product in a clean,
dry place protected from moist and keep it out of the reach of children.
Do not store the power tool in temperatures below 0°C. Do not place or
store any object on the top of the power tool.
Special condition for battery transport
The lithium-ion batteries contained in the power tool are subject to the
EN
48