Core Cub Cadet CCB410 Manual De Instrucciones página 10

before each use to make
sure the air intake screen and the fan
are in good condition. If any damage is
identified, replace the part immediately
before using the blower. A damaged fan
may shatter and a damaged air intake
screen will allow your fingers to be
injured by the fan.
WARNING:
blower without the nozzle and the
intake fan screen in place. Serious injury
or damage to the blower may result.
WARNING:
object (e.g. screwdriver, stick, etc.)
into the nozzle, air exhaust tube or the
intake fan screen. Any foreign article
that becomes lodged in the air system
may be ejected at great speed causing
serious injury when the blower is turned
ON. It may also severely damage the
blower fan.
WARNING:
Power Cell when making
adjustments, changing the nozzle,
removing debris from the blower
screen, leaving the tool idle or
unattended, cleaning, servicing,
storing or transporting the tool. Such
preventive measures reduce the risk of
starting the tool accidentally and
causing serious injury.
WARNING:
blower in any way. It is designed to
be used only with the nozzle and power
cell that are supplied with the tool. The
use of any other accessory or modifying
the tool may create a safety hazard.
This action will also void the warranty.
SPECIFIC SAFETY RULES
WARNING:
Check the
blower fan screen
Never operate the
Never insert a foreign
Always remove the
Never modify the
Never use the blower without the nozzle
properly installed. This will allow you to
direct the air flow where you want it and
make the tool more efficient.
Always keep the handles clean. Handles
that are covered with grease, chemicals
or debris will make holding onto the
blower difficult. Use a clean cloth
dampened with soapy water to clean
these surfaces.
Never use a pressure washer, garden
hose or any other liquid or chemical
solvents to clean the blower.
WARNING:
dusty materials in extremely dry
conditions for long periods of time,
static electricity may build up and
discharge without warning. To avoid this
situation in dry dusty conditions, only
operate the blower for short periods of
time and turning the blower OFF at
regular intervals.
Maintain firm footing and balance at all
times. Do not overreach or use the
blower from unstable surfaces such as
ladders, trees, steep slopes, slippery
surfaces, rooftops, etc.
Always grasp the blower using the
handles on the machine.
Use only in daylight or in good quality
artificial light.
Never use the blower for anything other
than its intended purpose. Use for
anything other than blowing leaves, grass,
weeds or lawn debris can be dangerous.
It may also damage the blower.
Never walk backwards while the blower is
turned ON as you might trip and may not
hear approaching persons or vehicles.
10
When blowing very