Publicidad
•
Press button 2 repeatedly until the second digit of the password appears on the display in the box
associated with the button.
Ref. 1784/3
•
Press button 3 repeatedly until the third digit of the password appears on the display in the box
associated with the button.
Ref. 1784/3
•
Press button 4 repeatedly until the fourth digit of the password appears on the display in the box
associated with the button.
Ref. 1784/3
3
After confirming the password, the device is ready to connect to the terminal when the message "WAITING
FOR CONNECTION" appears on the display.
The device automatically switches off the WiFi access point during this step after 10 minutes of inactivity.
4
Detect the WiFi network of button panel on the terminal:
– URMET_1784_3_XXXXXXXXXXXX (n the case of panel Ref. 1784/3)
– URMET_1784_4_XXXXXXXXXXXX (n the case of panel Ref. 1784/4)
The numbers XXXXXXXXXXXX indicate the MAC address of the device.
5
Select the WiFi network of keypad to configure. After successfully connecting, the message "USER
CONNECTED" appears to the display. It is not possible to connect to WiFi access point with multiple
terminals simultaneously.
6
Launch the App QR CODE reader and scan the QR CODE at the bottom of the last page with the camera
of your terminal to go to the SETTINGS
Button 2
Button 3
Button 4
web page.
Ref. 1784/4
Button 2
Ref. 1784/4
Button 3
Ref. 1784/4
Button 4
Publicidad
