Remington PROtect S8700 Manual Del Usuario página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 21
ENGLISH
7
Plug the product into the mains power supply. Press and hold the on button
to switch on.
8 The recommended optimum temperature of 170ºC is automatically
selected.
9
To adjust the temperature use the +/- temperature controls on the side of
the product. '+' increases the temperature '-' decreases the temperature.
10 Temperature Boost Function: To activate, press and hold '+' for 2 seconds,
this automatically selects the highest temperature.
11 Temperature Lock Function: To activate, press and hold '-' for 2 seconds. The
B symbol will apear and all the keys will be locked. To de-activate press the
'-' for 2 seconds.
12 The selected temperature will flash continuously until the desired
temperature is reached.
13 Before styling, press and hold the HydraCare button for 2 seconds to
activate (fig. 3).
14 The HydraCare button will pulse continuously as you style.
15 When the HydraCare function is ON, always ensure the Cool Mist Channel is
facing towards the ends of the hair when styling (fig. 4).
Styling the hair in the opposite direction when the HydraCare function is
ON will leave the hair damp and performance will be restricted.
16 The cool mist will only activate when the plates are close together (fig. 5).
17 Working on one section at a time, run the straightener through the entire
length of hair without stopping.
18 After use: Press and hold the off button to turn off and unplug the
appliance, allow to cool and wipe away condensation/steam residue with a
damp cloth before storing away.
, We recommend emptying the reservoir before storing away.
, Hinge Lock for Storage
The plates can be shut together for easy storage:
To lock, close the plates and push the hinge lock up to the locked position.
To unlock, pull the hinge lock down to the unlocked position.
, NOTE: Do not heat the unit in the locked position.
C CLEANING AND MAINTENANCE
Unplug the appliance and allow to cool.
Wipe all the surfaces with a damp cloth.
Don't use harsh or abrasive cleaning agents or solvents.
To prolong the life of the product, avoid touching the cap and wick on the
water reservoir, refill using the plug only.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido