Aspes ACE648 Serie Manual De Usuario página 32

EN
Mains values should match with those given in the nameplate of the hood. Lift
the glass cover and remove the filter in order to have access to the nameplate.
Use "Maximum 6A" fuse in the power installation to which the hood is
connected both for your own safety and product safety.
During installation, power cable should not be subject to compression or crush.
If the power cable is damaged, it should be replaced by an authorized service centre or a
qualified electrician. It also applies to any possible damage of the power cable in future.
Product should be connected to the mains only by an authorized and qualified
electrician. Product warranty starts only after correct installation of it.
Do not plug the product before you fix it on the wall.
Grounded plug is installed to the power cable of your product. This cable should
definitely be insert into a grounded socket.
Disconnect power connection of the product prior to cleaning and maintenance.
(Remove the plug of the product from the socket for disconnection.)
Warning: Failure to fix the screws or fastening elements according to the
instructions may lead to electric risks.
When installation of the product is completed, leave a distance of 60 cm
between the product and electric ranges or minimum 65 cm between the product and
ranges using gas or other fuels. If larger distance is specified in the installation
instructions of the gas-fueled ranges, you should stick to them.