Aspes ACE648 Serie Manual De Usuario página 42

EN
Functions of the equipment
Hood can be used in kitchens with or without flue.
For use with flue:
In case of use with flue connection, the hood should be connected to a flue to exhaust
the air. For efficient use of your hood, you should follow the shortest way of the piping
to the flue and the airway should be open
Your product is delivered from the factory as suitable for use with flue.
For use without flue
Picture 3
Replacement of Activated Carbon Filter
You should use 2 carbon filters on the product.
In order to put the carbon filter in place, the channels on the motor cover should be
brought to alignment with the lugs on the filter and rotate it half turn clockwise. To
remove it, you should rotate it anticlockwise by half turn. (Figure 9)
Note: The illustration is a reference image, your device may differ.
Warning!
Hood should not be connected to air channel where there
are other smokes.
Activated Carbon Filter
In the places without any pipe for connection to outside, you
should use activated carbon filter to filter and recirculate the
air in the place. You should get the activated carbon filter
from your authorized service centre. (Picture 3)
Figure 9