Notes For The Breast Milk Container And Teat; Emc - NUK BP7 Instrucciones De Operación

• To prevent
contamination (build-up of bacteria) and to
prevent the device becoming damaged,
please refer to the section entitled
"5 Cleaning and Sterilising"
• Only a breast pump which has been
thoroughly cleaned will achieve full
suction strength.
• Before using the breast pump, wash
your hands thoroughly.
• Remove all body jewellery (e.g. piercings)
before using the breast pump.
3.4 Notes for the Breast Milk
Container and Teat
For your
health: WARNING!
• Always use this product with adult
supervision.
• Never use feeding teats as a soother.
• Continuous and prolonged sucking of
fluids will cause tooth decay. This applies
in particular to sweetened drinks and
fruit/vegetable juices.
• Always check food temperature before
feeding.
• Before each use, especially when the
child has teeth, check the teat for
signs of excessive wear by pulling the
teat in all directions. Replace when
sticky from use, visibly damaged or
showing signs of tears or bites, to
avoid the danger of small parts being
swallowed.
• For safety and hygiene purposes, replace
the teat after 1-2 months use.
• Do not expose the teat to direct sunlight/
heat or leave in sterilising solution for
longer than the stated time as this can
damage the teat.
• Store hygienically in a dark and dry place.
• Do not dip the teat in medicine!
• For reasons of hygiene, if the bottle/breast
milk container is damaged on the inside
(e.g. scratches), it should be replaced.
infection or bacterial
on page 29.
child's safety
• Keep all components not in use out of the
reach of children.
Note: NUK
compatible only with the corresponding
product range (First Choice
Sense).
EN 14350.
Caution! Ignoring this warning can cause
minor personal
damage:
• Do not microwave bottles filled with feed
or water
damage).
Uneven heating may result in scalding!
and
• Never heat closed bottles as they may
explode!
• Before each use, softly squeeze the teat
vent and drinking hole to ensure they are
open.
• Cooling down a plastic bottle that has
been filled with hot liquid (> 80 °C) and
sealed with the lid, could cause the bottle
to deform permanently.

3.5 EMC

The electric breast pump complies with the
limits for group 1, class B of a medical
electrical device (according to CISPR 11).
Electromagnetic compatibility (EMC) refers
to the ability of a device to function properly
in its electromagnetic environment without
inducing
interferences. Such interferences can be
transmitted among others by connecting
cables or air.
Inadmissible
environment can lead to incorrect behaviour
of the medical device. Likewise, in certain
cases the electric breast pump can cause
such interferences with other devices. To
resolve the problems, one or more of the
following measures should be taken:
• Change the orientation or distance of the
device to the source of the interference.
• Use the electric breast pump in a
different location.
27
Bottles and
NUK Products
injury and/or
(risk of explosion/product
inadmissible
interference
Teats are
+
or Nature
comply with
property
electromagnetic
from the