Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
The Tramontina lawn mower is perfectly adjusted in the factory. After long periods of use, if the cut is not
perfect you will need to adjust the blade as detailed below:
1 - Adjust the height of the butterflies (1) on the tether (2) until the blade touches the reel. Make sure that
both sides of the lawn mower are even, observing that the blade is perfectly parallel to the reel line across
its full length (Fig. 05).
2 - To check that the setting is correct, lay the lawn mower down and test it with paper or newspaper. Place
the paper between the blades of the lawn mower and turn the reel blades. Check the result of the cut across
the full length of the blade (Fig. 06).
Be extremely careful when inspecting the blade adjustment as this and the cutting blades may
cause injury. Wear protective gloves.
ADJUSTING THE CUTTING BLADE
1
Fig. 04
2
Fig. 05
Fig. 06
10
EN
Publicidad
Tabla de contenido
