Installation instructions
US
FC
ESM
PTB
TR
RU
Fig. 15: Drilling dimensions
UK
1. Remove plug holder 1 from the cover 2. To do so,
press both sides of the cover at the top. Using
VIE
a suitable object, exert pressure on the plug
holder and pull off the cover.
2. Mark the drill holes on the wall.
HE
3. Drill the mounting holes and insert wall plugs.
4. Screw the plug holder 1 to the wall.
5. Fit the cover 2 on the plug holder 1 from below
AR
and press upward.
6. Insert the vehicle plug into the plug holder.
JPN
7. In some countries, e.g. Switzerland
management system must be used.
KOR
CHT
1) Time of printing. Further information is available from an
authorized Porsche dealer. Porsche recommends an
authorized Porsche dealer, as they have trained
THA
technicians and the necessary parts and tools.
22
Information
To remove the plug holder from the wall, press both
sides of the cover at the top and pull it off the plug
holder.
Technical data
Electrical data
Power
Rated current
Rated voltage
Mains connection
Power supply frequency
Overvoltage category
(IEC 60664)
Integrated residual
current device
Protection class
Degree of protection
Vehicle plug
Mechanical data
Weight of control unit
1)
, a cable
with cable
Vehicle cable length
Supply cable length
Ambient and storage conditions
Ambient temperature
Humidity
Elevation
PMCPU96A
Product information
9.6 kW
40 A 1-phase
Production Information
120/208-240 V~
Date of Manufacture
You will find the date of manufacture of the charger
L, N, PE
on the identification plate after the abbreviation
50 Hz/60 Hz
"EOL".
II
It is shown in the format:
Date of production.Month of production.Year of
production
Type A (AC: 20 mA)
+ DC: 56 mA
Charger Manufacturer
I
eSystems MTG GmbH
IP55 (USA: Enclosure
Bahnhofstraße 100
3R)
73240 Wendlingen
Germany
Type 1
10.14 lb (4.6 kg)
14.76 ft (4.5 m)
US/JET Type: 0.98 ft
(0.3 m)
-22 °F to + 122 °F
(–30 °C to +50 °C)
5 % – 95 %
non-condensing
Max. 16,404 ft
(max. 5,000 m)
above sea level