Maintaining The Digi 2 Console - Cressi DIGI 2 Manual De Instrucciones

EN
38

MAINTAINING THE DIGI 2 CONSOLE

The DIGI 2 console should be protected against crushing, blows, or
friction from dragging along the ground or with any material that may
compromise its functional and aesthetic characteristics.
During storage and transport, the high-pressure hose should not be
overly forced in the stowage with folds exceeding a 4 cm radius.
The DIGI 2 console should be rinsed thoroughly with fresh water after
every dive.
 I MPORTANT!
Do not use chemical products to wash the DIGI
2 console. Only use fresh water!
 I MPORTANT!
Do not use jets of compressed air to dry the
product, as these could damage the pressure sensor.
 I MPORTANT!
A Cressi Sub Authorized Center must test the
instrument calibrations once a year.
 I MPORTANT!
Before every dive check that the instrument is
in good condition, has no condensation under the glass, and that
there are no air leaks.
The DIGI 2 console must not be left in locations with temperatures
lower than –20° or higher than +70°.
P80-DIGI 2.indb 38
During periods when the device is not in use, we recommend storing
it in a dry and well-ventilated location with the smart cover in place.
 WARNING!
It is strictly prohibited to replace the hose originally
assembled on the DIGI 2 console with another of a different type or
model. Doing so will immediately void the warranty.
 WARNING!
If you should need to disconnect the hose from
the first stage/regulator unit from the DIGI 2, first make sure that
there is absolutely no pressure in the hose.
 WARNING!
Failure to observe the inspection and maintenance
procedures can cause serious injury or even lead to death!
13/06/19 14:01