Product Features; Technical Data - Bosch PLS 300 Manual Original

OBJ_BUCH-1219-001.book Page 18 Wednesday, March 3, 2010 9:25 AM
18 | English

Product Features

The numbering of the product features refers to
the illustration of the sawing station on the
graphics pages.
PLS 300
1 Base unit
2 Scale for mitre angle (horizontal)
3 Locking knob for height adjustment
4 Guide rail with sawing slot
5 Side stops of the guide rail
6 Support extension
7 Additional support
8 Bridge

Technical Data

Sawing station
Article number
Sawing
– Max. cutting length for crossway cuts (90°)
– Max. cutting height
– Mitre/Bevel Angle
Horizontal
Vertical
Cutting tiles
– Max. cutting length for crossway cuts (90°)
– Max. cutting height
– Mitre/Bevel Angle
Horizontal
Weight according to EPTA-Procedure 01/2003
Dimension of suitable saw blades
Max. overall length
Max. toothed length
Only use the saw blades recommended by
Bosch (see page 223). When using saw
blades that are too thin, danger is given that
the cut runs out of centre.
1 609 929 W68 | (3.3.10)
9 End stop for bevel cuts
10 Locking lever of the guide rail
11 Alignment mark
12 Locking knob for various mitre angles
13 Angle indicator (horizontal)
PTC 1*
14 Tile cutter
15 Stop with scale
16 Break-off cones
* only in combination with PLS 300 Set
mm
mm
mm
mm
mm 100
mm 76
(horizontal)
PLS 300
(PLS 300 + PTC 1)
3 603 M04 0..
315
25
± 45
°
° ± 45
–
–
° –
kg 3.4
PLS 300 Set
3 603 M04 1..
315
25
± 45
± 45
340
10
± 45
3.4 + 0.2
Bosch Power Tools