Berner BOT STARLOCK PLUS Manual Original página 20

Application tool
Bi-metal plunge
cut saw blade
for wood and
metal
HCS plunge
cut saw blade
for wood
Bi-metal plunge
cut saw blade,
hardwood
TC plunge cut
saw blade,
metal
Bi-metal plunge
cut saw blade
for wood and
metal
TC-Riff seg-
ment saw blade
Diamond-Riff
segment saw
blade
TC-Riff Delta
plate
TC-Riff grout
and mortar re-
mover
HCS multi
blade
Scraper, fixed
20 | English
Material Application
Softwood, soft Small separating cuts and plunge cuts;
plastics, plaster- example: Cutting a recess for sockets, cutting
board, thin-walled a copper pipe so that it is flush with a surface,
aluminium profiles making plunge cuts in plasterboard
and non-ferrous
Delicate adaptation work in wood;
metal profiles, thin
example: Sawing recesses for locks and fit-
sheet metal, non-
tings
hardened nails and
screws
Wood-based materi- Separating cuts and plunge saw cuts;
als, soft plastics including sawing close to edges, in corners
and in difficult-to-reach areas;
example: Thin plunge cut in solid wood for in-
stalling a ventilation grille
Hardwood, lamin- Plunge cuts in laminated boards or hardwood;
ated boards example: Installation of skylights
Metal, extremely ab- Plunge cuts in extremely abrasive materials or
rasive materials, metal;
fibreglass, plaster- example: Cutting kitchen front covers, easy
board, cement-bon- cutting through hardened screws, nails and
ded fibreboard stainless steel
Softwood, hard- Plunge cuts in laminated boards or hardwood;
wood, veneered example: Shortening door frames, recesses for
boards, plastic- a shelf
coated boards, non-
hardened nails and
screws
Cement joints, soft Making cuts near edges, in corners or in diffi-
wall tiles, fibreglass- cult-to-reach areas;
reinforced plastics, example: Removing joints between wall tiles
porous concrete for improvement work, cutting recesses in
tiles, plasterboard or plastics
Cement joints, soft Precise routing and cutting of tile/joint mater-
wall tiles, epoxy ial, epoxy resin and fibreglass-reinforced
resin, fibreglass-rein- plastics;
forced plastics example: Producing small cut-outs in soft wall
tiles and routing recesses in fibreglass-rein-
forced plastic
Mortar, concrete Rasping and sanding on a hard surface;
residue, wood, ab- example: Removing mortar or tile adhesive
rasive materials (e.g. when replacing damaged tiles), removing
carpet adhesive residue
Mortar, joints, epoxy Routing and cutting of joint material and tile
resin, fibreglass-rein- material, as well as rasping and sanding on a
forced plastics, ab- hard surface;
rasive materials example: Removing tile adhesive and joint
mortar
Roofing felt, carpets, Fast and precise cutting of soft material and
artificial turf, card- flexible abrasive materials;
board, PVC flooring example: Cutting carpets, cardboard, PVC
flooring, roofing felt, etc.
Carpets, mortar, Scraping on a hard surface;
concrete, tile adhes- example: Removing mortar, tile adhesive, con-
ive crete residue and carpet adhesive residue
1 609 92A 4DC • 13.12.18