Eldom nele TO265 Manual De Instrucciones página 10

INSTRUCTION MANUAL
EN
TOASTER TO265
GENERAL DESCRIPTION
1. Lever (switching on the appliance)
2. Stop
3. Toasting time control
4. Reheat
5. Defrost
6. Removable crumb tray
7. Top for warming up rolls
HOW TO USE THE APPLIANCE
After unpacking the appliance, make sure it has not been damaged during transport.
In case of any doubts, do not use the appliance before contacting a service centre.
Put the appliance on a flat and stable surface resistant to high temperatures.
When used for the first time, the heating elements and insulation of the toaster may give
off a specific smell. It is a normal phenomenon. The appliance should be used for the first
time without any products.
The Toaster is equipped with a „Central bread positioning system". This means that the
inserted grill automatically adjusts to the thickness of the slices and places them in a central
position between the heating parts.
- Turn the control (3) to position "1" and plug the appliance in.
- Put some slices of toast in the toaster and push the lever (1) down.
- Operation of appliance is indicated by the indicator light next to the button (2).
- Set the toasting time with the use of the control (3).
- When the toast is ready, it automatically pops up.
- To cancel toasting before the time set is up, press the "STOP" button (2).
- The Defrost (5) button should be pressed when toasting frozen bread. After putting the
bread in the toaster and pushing the lever (1) down, set the toasting time with the use of
the control (2) and press the button (5). Defrosting is signalled by the control lamp.
- The Reheat (4) button should be used when reheating bread. In case of this function, the
time set with the use of the control (2) is not important. After putting the bread in the
toaster and pushing the lever (1) down, press the button (4). Reheating is signalled by the
control lamp. The toaster will switch off automatically after about 35 seconds.
Note. It is not possible to push the lever (1) down, if the appliance is not connected to
the mains.
10 EN
TECHNICAL DETAILS
- power: 780-930W
- supply voltage: 220-240V ~ 50Hz