Eldom COLUMBIA VAC OPC1000 Manual De Instrucciones página 15

•
Power
When the power is on, this display lights up green, regardless of whether the device is
working or not.
•
The display of water tank filling
capacity has been reached. The device signals it by an additional sound (15 times), and
then switches off. Water tank must be emptied and placed back in the right position.
•
The button
The fan speed is signalled by the lights:
•
The button
the device. To set the time this button must be pressed until the right value from the „1-
24" range appears on the display. To disable this function, the "00" value must be set
using the button
setting will be deleted.
Enabling the function is signalled by the light
•
The button
humidity level. The value on the display will change in the following way (initial humidity
value is 50%): 50% → 55% → 60% → 65% → 70% → 75% → 80% → 40% → 45% →
50%. When the humidity in the room is below the set level,.the dehumidification function
will be automatically disabled – the fan will continue working. Current humidity level is
shown on the display.
•
The button
power cord to force the shut-down of the device. The shut-down is signalled by a sound.
- cdisplay signals the connection of the device to the power source.
- is used for selecting fan speed.
- is used for enabling and disabling the automatic switching on and off
. After switching off the device using the button
- is used for setting the humidity level. Press this button to set the
- is used for switching on/off the device. Do not unplug directly the
. The display lights up red when the 1.5
- fast, - slow.
.
, time
EN|15