Fig. 2 - Warning
• The vacuum cleaner should not be used during the charging process.
• The battery provided is the only one suitable for the vacuum cleaner. Do not use the charger
for a non-rechargeable battery.
• Unplug the vacuum cleaner if it is not going to be used during long periods of time.
You can charge the product from its charging base or by plugging it directly.
Fig. 3 - Cleaning the dust tank
• Remove the whole dust tank by pressing the release button and taking it out.
• Take out the filters and the plastic protector and empty the contents of the dust tank.
• The filter can be shaken clean or cleaned and rinsed with warm water (no detergents). Make
sure all the parts are completely dry before reinstalling them.
• Wash and rinse the tank if necessary.
• Place the tank back into its position. A click will be heard, indicating it is properly fixed.
Note: make sure all the parts are dry before place them back in their position.
Place the filter in the dust tank. Assemble the dust tank in the motor unit following the opposite
procedures as for detaching the dust tank.
fig. 3
7
fig. 2