Publicidad
Step 1.
Open the socket:
Step 1-1. Disengage the left lever by pressing it
down and sliding it out of the hook.
Step 1-2. Disengage the right lever by pressing
it down and sliding it out of the hook.
Step 1-3. Keep the right lever positioned at
about 90 degrees in order to fl ip up
the load plate.
Step 2.
Insert the 2011-Pin CPU:
Step 2-1. Hold the CPU by the edge with the
triangle mark(Pin 1) on your upper
right corner.
Step 2-2. Locate Pin1 and the two orientation
key notches.
orientation key notch
orientation key notch
2011-Pin CPU
For proper inserting, please ensure to match the four orientation key
notches of the CPU with the four alignment keys of the socket.
ASRock X79 Extreme7 Motherboard
alignment key
Pin1
alignment key
2011-Pin Socket
Pin1
13
Publicidad
