Beper P203TFO001 Manual De Instrucciones página 8

Electric water bag Use instructions
Use
Place the bag on a flat and stable surface, making sure to keep it horizontal.
Connect the charger to the connector found on the bag, and then connect its plug to the wall socket. Now the
charging light on the charger turn on, and the bag starts heating up.
During charing, normally the bag swells a little, due to the steam that is formed inside. Gently shake the bag to
spread the heating energy evenly.
After approx 8-14 minutes charging, the indicator light turns off, and the bag is ready to be used.
Warning: do not lay on the bag, and do not put excessive pressure on the bag, to avoid damage and
failure
Warning: avoid direct contact with the skin when the bag is hot, to avoid burnings.
When done using, first of all disconnect the plug from the wall socket; then remove the charger from the bag.
Cleaning and maintenance
Unplug the bag from the wall socket and allow it to completely cool off before proceeding with cleaning opera-
tions.
Warning: do not rinse the product under tap water; do not submerge the bag in water o other liquids;
do not wash the bag in the washing machine.
Clean the outer surface of the bag and the charger with a soft, dry cloth. Do not use solvents.
Allow the bag to completely cool off before storing it
Technical date
Power: 380-420W
Input: 220-240V - 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected.
8