Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshouting
Problem
During learning on the receiver, the
receiver's Learn indicator stays on
steadily for 10 seconds.
Pressing the control key does not
produce a fast blink on the receiver.
The Learn key still blinks slowly.
When saving the scenario, the Learn
keys on some receivers do not go off.
DECLARATION
Nous déclarons que les produits satisfont aux dispositions de :
We declare that the products satisfy the provisions of :
La Directive 1999/5/CE du Parlement européen
et du Conseil du 9 mars 1999 "R&TTE"
sous réserve d'une utilisation conforme à sa destination
et/ou d'une installation conforme aux normes en vigueur
et/ou aux recommandations du constructeur
Ces dispositions sont assurées pour la directive 1999/5/CEE par la conformité aux normes suivantes :
These provisions are ensured for directive 1999/5/CEE by conformity to the following standards :
Cause
The receiver can no longer be linked
to other transmitter units :
the receiver's memory is full.
Distance is too great between
receiver and transmitter.
1 - Distance is too great between
these receivers and the transmitter.
2 - The media linked to the
transmitter key is infrared but the
receiver is Radio.
3 - The media linked to the
transmitter key is Radio but the
receiver is PLC/IR and the
installation contains no RF/PLC
interface.
19
DE CONFORMITE
on condition that they are used in the manner
intended and/or in accordance with the current
installation standards and/or with the manufacturer's
recommandantions
EN 60669-2-1
EN 300220-3
20
Solution
Clear any unnecessary scenarios.
Move one of the products involved,
to bring them closer together.
1 - Move one of the products involved,
to bring them closer together.
2 - Change the media linked to the
key in question.
3 - Change the media linked to the
key in question or set up an RF/PLC
interface.
Publicidad
