Troubleshooting - HJM DHM428 Instrucciones De Uso

Deshumidificador DHM428_Maquetación 1 17/06/14 09:49 Página 36

TROUBLESHOOTING

If a condition listed below occurs, please check the following items
before calling customer service.
Problem
The unit doesn't
operate
The dehumidifying
function doesn't work
No air is discharged
Operation is noisy
Possible Cause
Has the power cord been
disconnected?
Is the tank full indication
lamp blinking? (The tank is
full or in a wrong position.)
Is the temperature of the
room above 35 or below
5 ?
Is the air filter clogged?
Is the intake duct or
discharge duct obstructed?
Is the air filter clogged?
Is the unit tilted or
unsteady?
Is the air filter clogged?
- 36 -
Solution
Plug the power cord into
the outlet.
Empty the water in the
drainage tank and then
reposition the tank.
The protection device is
activated and the unit
cannot be started.
Clean the air filter as
instructed under
"Cleaning the
dehumidifier".
Remove the obstruction
from the discharge duct
or intake duct.
Clean the air filter as
instructed under
"Cleaning the
dehumidifier".
Move the unit to a stable,
sturdy location.
Clean the air filter as
instructed under
"Cleaning the
dehumidifier".
E
N
G
L
I
S
H