Installation Procedure - Electrolux E6WHPED4 Instrucciones De Instalación

Installation Procedure

1. Remove the pedestal and all
accessories from the box.
2. Make sure that the rear rubber
feet are mounted.
3. Adjust the front adjustable feet to
make the pedestal stable.
4. If you install the pedestal under a
brand new appliance, unpack the
appliance as indicated in the
instructions supplied with it and
then proceed with step 6.
5. If the appliance is already
connected:
-
Disconnect the mains plug from
the mains socket.
-
For washing machine. Close the
water tap.
-
For washing machine.
Disconnect the inlet hose(s) form
the water tap and let the water
flow out from the inlet hose(s)
and the drain hose and collect it
in a shallow basin.
-
For tumble dryer. Empty the
water container in a wash basin
or, if available, activate the direct
drain system to let the water flow
out.
6. Screw the front brackets on the
pedestal.
7. For washing machine. Gently lay
the washing machine on its
detergent dispenser side.
Lay it on a cardboard or on a
piece of polystyrene to avoid
scratching the cabinet.
3