14.
For tumble dryer. Lift the appliance
and slide backwards so that the
appliance front feet slides under
foot locking brackets.
15.
For tumble dryer. Screw the rear
brackets (C) to the back of the
appliance by using the screws
removed in step 12 and adjust the
appliance feet if required.
16.
Move the Pedestal/Appliance
assembly to its permanent
location. Use a spirit level to check
if the assembly is properly leveled.
If not leveled, adjust feet to level
properly.
17.
If available, you can insert the
additional container (F).
18.
Connect the appliance as indicated
in the instructions supplied with the
appliance.
5