Key Automation TURBO 50 Instrucciones Y Advertencias Para Su Instalación Y Uso página 15

4.3 - Fixing
ake he lid o unscrewin he screws
he pla e nser he wo socke head screws
It is important to lock the two socket head screws forcefully, making
sure, that the gearmotor is steady on the ground, during the whole
gate running.
4.4 - Rack assembling
elease he earmo or as indica ed by he
the gate.
Put a rack element on the pinion gear and fasten it to the gate with
screw and spacing bars.
Move the gate manually bringing the pinion gear into line with the
last spacing bar.
Fasten the rack element for good.
90mm
u he earmo or on
Fig. 5
and open en irely
Fig. 8
he re ula in allowed by he rack is no su cien i is possible o
counterbalance the gearmotor high working on the four screws
he screws should be i h ened a ain a er he mo or has been
operated a few times.
Fig. 6
For a correct positioning of the other elements and to assure their
straightness, it is necessary to employ a rack element using it as
suppor and re erence
It is besides necessary to assure an aperture of 2 mm between
rack and pinion gear, so that the gate weight doesn't rest on the
earmo or pinion ear
EN
Fig. 7
Fig. 9
15