Before Use; After Use; During Use - Silva CROSS TRAIL 2 Manual

FULL VERSION MANUAL
CROSS TRAIL 2
Thank you for choosing Silva Cross Trail 2 headlamp. This headlamp
can, thanks to the modular design, also be used on a helmet or on a
bike handle bar.
The Cross Trail 2 headlamp is equipped with Intelligent Light
which is a light distribution technology that combines a wide angle
flood light with a long reach spot light. This unique light image gives
the user peripheral and long distance vision at the same time. For a
runner, cross country skier, mountain biker or night orienteer this
translates into less head movement, increased control, better bal-
ance and more speed.
PRODUCT OVERVIEW
The Cross Trail 2 headlamp consists of the following parts:
• Headlamp body
• Headband
• Battery belt
• Helmet bracket with adhesive strip
• Bike bracket
• Extension cable
• Battery case with attachment strap
• 4 pcs AA alkaline batteries
• Quick guide

BEFORE USE

INSERT BATTERIES
Cross Trail 2 comes with a separate battery case. Insert the bat-
teries by opening the battery lid on one of the short sides. Place the
batteries according to the image on the side of the case.
ADJUST THE HEADBAND
The elastic headband is designed to give a comfortable fit at speed
during activities such as running, XC skiing etc. Adjust the headband
by moving the sliding buckle to fit it onto your head.
Flexible battery carrying
The battery pack can be carried in multiple ways; for example in
a pocket, backpack, on the waist or mounted on the bike frame by
using the integrated strap.
MODULAR SYSTEM
In order to move the headlamp body from the headband to either the
helmet bracket or the bike bracket, gently press the release button
(located on top of the headlamp on the left hand side) forward while
lifting the headlamp body. Insert the headlamp body in the bracket
and gently press it down until you hear a click sound.
MOUNTING THE HELMET BRACKET
The helmet bracket comes with pre mounted adhesive on the back
for easy mounting on any helmet. The adhesive is a polyethylene
foam tape developed to not damage or cause any type of weakness
to plastic.
Before mounting the helmet bracket on a helmet, make sure the
surface is dry and clean. Remove the protective paper from the ad-
hesive tape on the helmet bracket. Gently press the helmet bracket
to the helmet.
MOUNTING THE BIKE BRACKET
The bike handlebar bracket is developed for use on bike handlebars
with a dimension between 25 and 32 mm. Included with the bike
handle bar attachment are 3 rubber inserts. Use these to ensure the
correct fitting for your bike and tighten the bottom screw to secure it
on to the handlebar.

DURING USE

SWITCH ON YOUR HEADLAMP
On the side of the headlamp body there is a push button which
controls all light modes.
Available light modes: Max, Mid, Min, Wide, Blink
Each press on the button gives you the following light:
1. Turns the headlamp ON with all LEDs in maximum power.
2. Goes to Mid mode
3. Goes to Min mode
4. Goes to Wide mode
5. Starts over from 1 – Max mode
To turn OFF the headlamp; press and hold the button for 2 seconds.
The flash function, which is used to attract attention, is started from
OFF mode by pressing and holding the button for 2 seconds. To turn
OFF; press and hold the button for 2 seconds.
Art.no 37412
TEMP CONTROL
The headlamp temperature will increase during use. The headlamp
temperature is mainly depending on light mode, ambient tempera-
ture and the airflow (speed). The Cross Trail 2 headlamp is equipped
®
with a temperature control function which prevents the headlamp
body from overheating by reducing the power to the LEDs. This
means that the lower the ambient temperature, the stronger the
light output.
Note: Always make sure that the batteries are disconnected when
the headlamp is stored in a closed compartment such as a bag,
pocket or similar.
BATTERY INDICATION
When the headlamp is turned off a small LED is turned on inside the
front of the headlamp to indicate the status of the batteries. The bat-
tery status indication LED will be on for 5 seconds after power off.
Green light – Battery in good condition (more than 70% remaining)
Orange – Medium (30%-70% remaining)
Red – Battery in poor condition (Less than 30% remaining)

AFTER USE

MAINTENANCE
To make sure you get maximum performance from your Cross Trail
2 headlamp, clean it regularly with a damp cloth.
Headset cleaning – wash in washing machine at 40º C.
TECHNICAL SPECIFICATIONS
Weight: headlamp (including head bracket): 80g
Battery pack with batteries: 130g
Battery type: 4pcs AA alkaline batteries
Light distance 120m
Lumen (Max): 300 Lumen
Burn time: Max/Mid/Min/Blink: 5h30min/15h/30h/50h
Water resistance: IPX6
Material head lamp body: PC/ABS and Aluminium
Operative temperature range: -20º - +60º C
PROTECT THE ENVIRONMENT.
Headlamp and batteries should be recycled and must not be thrown
in the regular trash. Dispose these items in accordance with appli-
cable local regulations.
WARRANTY
Silva warrants that, for a period of two (2) years, your Silva Product
will be substantially free of defects in materials and workmanship
under normal use. Silva's liability under this warranty is limited to
repairing or replacing the product. This limited warranty extends
only to the original purchaser.
If the Product proves defective during the Warranty Period please
contact the original place of purchase. Make sure to have your proof
of purchase on hand when returning the product. Returns cannot
be processed without the original proof of purchase. This warranty
does not apply if the Product has been altered, not been installed,
operated, repaired, or maintained in accordance with instructions
supplied by Silva, or has been subjected to abnormal physical or
electrical stress, misuse, negligence or accident. Neither does the
warranty cover normal wear and tear. Silva is not responsible for any
consequences, direct or indirect, or damage resultant from use of
this product. In no event will Silva's liability exceed the amount paid
by you for the product. Some jurisdictions do not allow the exclusion
or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This Warranty is valid
and may be processed only in the country of purchase.
For more information please visit www.silva.se
Visit: www.silva/enviroment
for more information about the
Waste Electrical and Electronic
Equipment (WEEE) Directive.