Controls And Connections - Fenton FT12LED Manual De Instrucciones

CONTROLS AND CONNECTIONS

1. MICROPHONE VOLUME
Adjust the signal level of microphone.
2. ECHO CONTROL
Adjust the intensity of the echo effect.
3. GUITAR VOLUME
Adjust the signal level of guitar.
4. TREBLE
Adjust high tone control.
5. BASS
Adjust high low tone control.
6. VOLUME
Adjust the overall output level of the portable sound system.
7. AUX IN
RCA jack input for connecting audio units with line level output (e.g.
mixer, CD player, tape recorder).
8. MICROPHONE INPUT
6.3mm ¼" input jack for connecting a microphone.
9. MIC PRIORITY SWITCH
Microphone switch to give microphone input higher priority.
10. BATTERY INDICATOR
LED indicator for status of battery.
11. GUITAR INPUT
6.3mm ¼" input jack for connecting a guitar.
12. LIGHT SWITCH
Turn on the LED (frontside) of the speaker on/off.
Noted: With this light switch you turn also the jellybal on/off by model FT15JB
only.
13. POWER SWITCH
Turn the power on/off
14. POWER INPUT
Before connecting the power cord, check if the mains corresponds to the
voltage indicated on the rating plate on the unit.
5