NSK Ti MAX Z Serie Manual De Operación página 8

4-1-2 Mounting the Bur ( FG Bur ) to Z85,Z85L,Z95,Z95L
1) Connect handpiece and motor.
2) Depressing the push button and insert the bur into the chuck. ( Fig. 2 )
CAUTION
· After the Bur is locked in place, lightly pull out the Bur to make sure the Bur is locked.
· If the Bur is not correctly secured it may release during operation and can cause injury.
4-2 Removing the Bur ( Fig.3 )
1 ) Push the push button with a thumb. (
2 ) Pull out the bur. ( )
)
Push Button
Fig. 2
Push Button
Fig. 3
7