NSK Ti MAX Z Serie Manual De Operación página 9

5. Maintenance
After the treatment, be sure to perform the maintenance below.
5-1 Cleaning ( Handpiece )
This handpiece can be washed via Thermo Disinfector.
Scrub dirt and debris from the handpiece, and wipe clean with alcohol-immersed cotton swab or cloth. Do not use a wire brush.
Refer the manual of Thermo-Disinfector for performing it.
5-2 Cleaning ( Z10L,Z15L,Z24L,Z25L,Z85L,Z95L )
Wipe clean the Cellular Glass Optic Rod entry point and exit point with an alcohol-immersed cotton
swab. Remove all debris and oil. ( Fig.4 )
8
Cotton Swab
Glass Rod
Fig. 4