NSK Ti-Max X-SG65L Manual Del Usuario página 3

1. Connection / Disconnecting the Handpiece and Motor
(1) Connecting
Push the handpiece on to the motor taking care to keep it in alignment.
X-SG65L Only
Twist the handpiece until it locks into position with a clicking sound.
(2) Disconnecting
Hold the motor and the handpiece, and pull it out.
2. Mounting and Removing Bur
(1) Handpiece Bur
Inserting the Bur
1) Turn the Bur Lock Ring in the direction of mark [O] until it clicks.
2) Insert the bur.
3) Turn the Bur Lock Ring in the direction of the mark [C] until it clicks. Make
sure Black Dots align (Fig. 2).
2
Handpiece
Motor
Fig. 1
Bur lock ring
Black Dots
Open
Align the Black Dots
mark [C]
Close
Fig. 2
Removing the Bur
Turn the Bur Lock Ring in the direction of mark [O] until it clicks and remove the bur.
(2) Contra-angle bur
Inserting the Bur
1) Turn the bur lock ring in the direction of mark [O] until it clicks.
2) Insert the supplied Bur Stopper into the chuck. (Fig. 3)
3) Insert the Contra-Angle Bur until it stopped.
4) The bur will be chucked by turning the bur lock ring in the direction of mark [C] until it clicks and
Black Dots line up.
Removing the Bur
Turn the Bur Lock Ring in the direction of mark [O] until it clicks and remove the bur.
Remove the Bur Stopper
1) Turn the Bur Lock Ring in the direction of mark [O] until it clicks.
2) Insert the supplied Bur Stopper puller into the chuck. Pull out the Bur Stopper by hooking at the slit of
Bur Stopper. (Fig. 4)
Bur
Bur Stopper
Fig. 3
Bur Stopper Puller
Fig. 4
3