CASCO PF 1000 Serie Manual Del Usuario página 9

OPTIONAL FEATURES AND LABELLING
Symbol
Options
**** Low temperature classifica-
tion: - 40 °C
E3
Electrical ancillary properties
E2
Electrical ancillary properties
C
Chemical resistance
(optional)
OVERVIEW OF CHEMICALS ON WHICH THE HELMET HAS BEEN TESTED
Chemical concentration (% by weight)
Sulphuric acid 30 (hydrous solution)
Sodium hydroxide 10 (hydrous solution)
p-Xylene undiluted
Butane-1-ol undiluted
n-Heptane undiluted
OVERVIEW OF CHEMICALS ON WHICH THE NECK PROTECTION HAS BEEN TESTED
Chemical Neck protection
Sodium hydroxide 40%
HCI 36%
Sulphuric acid 30%
o-Xylene 100%
OVERVIEW OF CHEMICALS ON WHICH THE VISOR HAS BEEN TESTED
Chemical concentration (% by weight)
Sulphuric acid 30 (hydrous solution)
Sodium hydroxide 10 (hydrous solution)
p-Xylene undiluted
Butane-1-ol undiluted
n-Heptane undiluted
16
Meaning
Even at a low temperature of -40°C the
helmet fulfils all the requirements set in the
standard DIN EN 443:2008 in respect of
impact absorbance and penetration.
Leakage current between 2 points on the
helmet surface (surface insulation).
Leakage current between the outer and inner
surfaces of the helmet shell (wet helmet)
Resistance to contact with liquid chemicals
(see table)
IDENTIFICATION ON THE VISOR
EN 14458:2004 Document number European standard
CASCO
Manufacturer's name and identity mark
08.2046.50
Identity number of the visor model for PF1000 EXTREME
08.2047.10
Identity number of the visor model for PF 1000 R
Year of manufacture
+
Symbol for use by fire brigade (PF 1000 Extreme)
=
The icon for general use (PF 1000 R)
Symbol for face protection / symbol for eye protection
K /
AT Resistance to medium energy impact at extreme temperature
Ω
Electrical properties
i
Reference to user instructions
CE 0497 / CE 0158 ID number of notified body
STORAGE; USE AND MAINTENANCE
Please carry out an inspection of the visor screen and linkages at regular and also deployment-dependent inter-
vals. A damaged /scratched visor may no longer be used. It must be rendered unusable and replaced.
CLEANING AND CARE OF PANORAMA VISOR (PF 1000 EXTREME)
Clean the visor using only lukewarm water. Do not use solvents. Proper cleaning, care and handling of the visor
are prerequisites for its faultless functioning.
Visor temperature range
Between a lowest temperature of -40 °C and a highest temperature of 120 °C, the visor fulfils the relevant
requirements of the standard DIN EN 14458:2004.
OPERATING EYE PROTECTION VISOR
(OPTIONAL)
The eye protection visor can be opened by means of
a lever on the right and left. This is also ideally suited
for people wearing spectacles.
Fig. 9
USE OF NECK PROTECTOR
The PF 1000 helmet series is equipped with a neck protector made of Nomex. This is folded into the helmet
and can be pulled down as and when required. Please fasten the two snaps for maximum comfort. By means
of the snap fastenings at 5 different points, further neck protection alternatives can be adopted such as leather,
luminescent or Holland cloth all-round neck protection.
OPERATING PANORAMA VISOR
By depressing the right and left side, the Panorama
Visor can be made to drop down or retract accor-
dingly.
Fig. 10
17