Parts and Accessories - Installation Instructions
Supplementary Information to Installation Instructions
Roof antenna D-network BMW 3 Series saloon (E46/4)
Important information!
Observe the following points:
The installation kit is also suitable for BMW 3 Series coupe (E46/2)
Section 3. Page 4,
1
Section 4. Page 4,
1
Forward direction
Fahrtrichtung
2
Drilling hole for antenna
ø18,5
2
F 46 0212 B
Mounting antenna foot
7
6
5
4
3
2
F 46 0213 B
Fig. F 46 84 053 B
and dimension 2 in text dispensed with and
replaced by
Dimension 2 = 108 mm
Fig. F 46 84 054 B
and text under figure dispensed with and
replaced by
Before mounting in vehicle, connect antenna
cable (1) to antenna foot (2).
Carefully fit disassembled antenna foot (2) in
hole (3) (take care not to pull down headlining
too far).
Hold antenna foot (2) from below.
Fit sealing ring (4) and retaining ring (5) from the
outside (top).
Lightly screw on antenna nut (6).
Turn antenna foot (2) together with antenna cable
connection to the left, hold firmly and tighten
antenna nut (6) with a 20 mm open-ended spanner
(tightening torque 4 Nm).
Firmly tighten antenna radiator (7) (tightening
torque 2 Nm).