Technical Specifications - Skil 2975 Instrucciones

GB
INTRODUCTION
This tool is intended for lengthways and crossways
G
cutting of wood with straight cuts as well as angle
cuts to 45°; with the appropriate saw blades also non-
ferrous metals, light building materials and plastics
can be cut

TECHNICAL SPECIFICATIONS

Capacity at 0°
Capacity at 45°
Saw blade Ø
Arbor Ø
No load speed r.p.min.
Volts
Weight
Charging time
SAFETY
Read and save this instruction manual and the
G
enclosed safety instructions 2
Check voltage indicated on nameplate of tool/charger/
G
battery
In case of electrical or mechanical malfunction,
G
immediately switch off the tool or unplug charger from
power source
Avoid damage that can be caused by screws, nails and
G
other elements in your workpiece; remove them before
you start cutting
When you put away the tool, switch off the motor and
G
ensure that all moving parts have come to a complete
standstill
Before using accessories always compare the maximum
G
allowed speed of that specific accessory with the speed
of the tool
Never use the tool without the original protection guard
G
system
This tool should not be used by people under the age of
G
16 years
This tool is not suitable for wet cutting
G
The kerf guide has to be adjusted in case different
G
diameters of sawblade are used
Do not use a circular saw blade which is cracked,
G
deformed or dull
Do not use a circular saw blade of which the body
G
thickness is bigger, or the teeth setting is smaller than
the thickness of the kerf guide
After switching off your circular saw, never stop the
G
rotation of the saw blade by a lateral force applied
against it
Never clamp or wedge the lower guard in open
G
position; ensure that it operates freely
Never use circular saw blades made of high speed
G
steel (HSS)
Only use thin saw blades designed for cordless
G
circular saws
Do not remove the kerf guide
G
Keep hands away from the saw blade while the tool
G
is in use
Do not cut material containing asbestos
G
Do not attempt to cut extremely small workpieces
G
Remove all obstacles on top of as well as
G
underneath the cutting path before you start cutting
Do not work overhead with the tool
G
Do not activate switch when carrying the tool
G
2975
Always remove battery from tool before making
G
any adjustment or changing any accessory, in
41 mm
order to reduce the risk of starting the tool
32 mm
accidentally
137 mm
CHARGING/BATTERIES
Charge battery only with the charger that is supplied
G
10 mm
with the tool
3,700
Do not charge batteries of other manufacturers
G
Do not touch the contacts in the charger
18 V
G
Do not expose tool/charger/battery to rain
G
3.8 kg
Do not not carry or suspend the charger by the cord
G
1 hour
Never charge battery outdoors 3
G
Store tool/charger/battery in locations where
G
temperature will not exceed 40° C or drop below 0°
Batteries will explode in fire, so do not burn battery
G
for any reason
When damaged, and under extreme usage and
G
temperature conditions, batteries may start to leak
- if liquid comes into contact with the skin, wash
- if liquid gets into the eyes, flush eyes with clean
When battery is not in tool or charger, it should be
G
kept away from metal objects such as nails, screws,
keys etc. to prevent short-circuit
Do not use charger when damaged; take it to one of
G
the officially registered SKIL Service Stations for a
safety check
Do not use charger when cord or plug is damaged;
G
cord or plug should be replaced immediately at one
of the officially registered SKIL Service Stations
Do not use battery when damaged; it should be
G
replaced immediately
Do not disassemble charger or battery
G
Do not attempt to recharge non-rechargeable
G
batteries with the charger
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
Do not connect the blue (= neutral) or brown (= live)
G
wire in the cord of the charger to the earth terminal
of the plug
If for any reason the old plug is cut off the cord of the
G
charger, it must be disposed of safely and not left
unattended
8
quickly with soap and water, then with lemon juice
or vinegar
water for a minimum of 10 minutes and seek
immediately medical attention