weltico SKIMMER A800 Manual De Instrucciones página 10

Put the assembly or the input in position on the wall as
above.
Pierce holes in the arrowed locations for the passage of
screws. Bolt with the screws supplied.
Attach the liner hook on top of the wall.
Reinforce a metal bushing to be fixed on bosses
provided.
Using a cutter, cut the liner inside of the flange.
Remove the waste liner material.
[2]
[4]
[6]
Mark the
water line
Fix a flat joint, adhesive side, to the input.
Once the liner is in position, place the second flat joint,
adhesive side, on the flange. Position the flange of the
liner to match the holes and tighten all the screws.
Clip the screw cover on the flange
75 mm
minimum
[3]
[5]
[7]
Page : 10