Replace The Lower Knife; Fabric, Thread And Stitch Length - Texi Tegra 4 Manual De Instrucciones

EN

REPLACE THE LOWER KNIFE

FABRIC, THREAD AND STITCH LENGTH

FABRIC
LIGHT, THIN FABRIC: Organdy,
Thin knitted fabric, Taffeta, Silk,
Lining etc.
MEDIUM THICKNESS FABRIC:
Cotton, Warp knitted fabric,
Satin, Gabardine, Broad-cloth,
Clothing
HEAVY FABRIC: Tweed, Suit
fabric, Denim, Thick cloth etc.
KNITWEAR
2-THREAD OR 3-THREAD
HEMMING SEWING
102
Texi Tegra 4 INSTRUKCJA 2019.indb 102 Texi Tegra 4 INSTRUKCJA 2019.indb 102
NOTE: Turn off the power before operation.
Replace lower knife Remove: remove the cloth waste cover,
open the looper cover, position the upper knife in the non
working position, adjust the needle to the highest position,
loosen the screw with the screwdriver (L) in accessory box,
remove the screw (A) and lower.
Installation: put the new lower knife in, tighten the fixing
screw, put the upper knife back to the working position, close
the lopper cover.
THREAD
Cotton:50-70#
Yarn:70-140#
Cotton:40-60#
Yarn:70-140#
Cotton:30-50#
Yarn:70-140#
Cotton:40-60#
Yarn:70-140#
Cotton: 1 20-140#
Texi Tegra 4
STITCH LENGTH
2.0-4.0mm
2.0-4.0mm
2.0-4.0mm
2.0-4.0mm
1.0-2.0mm
18.09.2020 09:42 18.09.2020 09:42