rivacase VA2110 Manual Del Usuario página 2

Thank you for purchasing the RIVACASE portable battery.
Read all instructions and warnings carefully before
using the RIVACASE portable battery.
Product package:
• RIVACASE portable battery
• User manual
• Micro USB cable
Specifications:
Model: VA2110
Battery: Li- Polymer 3.7 V
10000 mAh 37 Wh
Input: Micro USB 5 V 2 A
Type-C 5 V 2 A
Lightning 1.5 A
Output: USB1 5 V 2.1 A
USB2 5 V 2.1 A
Size: 138 x 72 x 15 mm
Safety protection
Over charge | Over discharge | Short circuit protection | Over current | Over Voltage
Operating instructions
Charge the external battery fully before the rst use. Connect the cable to the Micro USB/Type-C/
Lightning input port of the external battery. Connect the other end of the cable to the power
source. You can use PC, AC charger or car charger to charge the battery. We recommend using
RIVAPOWER charger with at least 12W (2.4A) output. Average full charging time is 5-6 hours.
The LED indicator shows the charge level during the charging of the RIVAPOWER battery.
After RIVAPOWER battery is fully charged, 4 LED indicator lights are constantly on. Disconnect
the cable from the battery when charging is complete.To charge the mobile device, connect it
to the output port (Port 1 and/or 2) of the RIVAPOWER battery using the cable. Charging will
start automatically, and the indicator will show the remaining charge of RIVAPOWER battery.
Disconnect the cable from the battery when charging is complete.
Pass through charging
This function allows connecting simultaneously the external battery to the power socket and
mobile devices to the battery. In this case mobile devices and external battery are charging
simultaneously.
We do not recommend keeping RIVAPOWER battery discharged, as it might be damaged. Press
the button to check the battery charge.
Lightning Input
USB 1
Micro USB
Input
EN
Type-C Input
USB 2
Check Button
with
LED Indicator
LED status Power Level
0%-25%