ADVICE AND WARNINGS
• The Gyspack must be stored in vertical position; horizontal position can only be temporary.
• Choose a sheltered room with appropriate airing.
• Recharge the Gyspack in an aired place and avoid making sparks.
• The charger must be installed so that the main plug is accessible.
• Regularly check the charger of the GYSPACK, the plug and the case, to detect any damage. If
it is damaged, it must not be used before reparation.
• In case the charging block case is damaged, it has to be replaced by the manufacturer, his
after sales service or by a qualified person, in order to avoid any danger.
• Do not open the product. All modification or attempt of modification not done by a technician
of GYS can lead to the cancellation of the warranty of the product and of the responsibility of
the firm GYS on this product.
• Separate collection required - Do not throw in a domestic dustbin.
• The machine is delivered with a socket type CEE 7/7.
• It must be connected to a ground socket 220 V.
• The GYSPACK must not be used as toy by young children, or used by young children or
disabled persons without any supervision.
DECLARATION OF CONFORMITY OF THE AUTONOMOUS STATER GYSPACK
The company GYS certifies that the charger used in the machine :
GYSPACK AUTO / GYSPACK 400
is manufactured in compliance with the requirements of the following European directives :
-
Low Voltage Directive : 2006/95/CE - 12/12/2006
-
EMC Directive : 2004/108/CE - 15/12/2004
He is therefore comply with the following harmonized standards :
-
EN61558-1, EN61558-2-6
-
EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3
The appliance is CE-marked : 2011
01/12/11
Société GYS
134 BD des Loges
53941 Saint Berthevin
Gyspack AUTO / Gyspack 400
Nicolas BOUYGUES
Président Directeur Général/ CEO
5