Commercial Electric 111564 Guía De Uso Y Cuidado página 6

Installation (continued)
Installing the remaining two LED
4
assemblies
Repeat steps 1 through 3 to install the remaining two LED
puck assemblies (A).
IMPORTANT: Ensure that you measure the distance of
every LED puck assembly (A) before installation.
6
Securing the cords
Connect the wire from the LED puck assembly (A) and
power cord to the hole in the connection box (D) as shown.
Use nail-on fasteners (BB) to attach the wires to the
cabinet.
NOTE: There is no extension wire for this light.
A
5
Installing the connection box
Attach the connection box (D) to the side of the cabinet
using two mounting screws (AA).
D
6
D
AA
A
BB
C