nedis WIFIPO10FWT Guia De Inicio Rapido página 8

5. Confirm the password of the Wi-Fi network to which your phone is connected
and tap Confirm. The app will now search for the product.
6. Rename the product after it has been found and added.
4
If the above connection method fails, the product can be connected using
AP mode.
1. In the Nedis SmartLife app, tap + in the top right corner.
2. Under Add Manually, tap Smart Plug.
3. Tap AP Mode in the top right corner.
4
4. Check if (A
4
4 If A does not blink slowly, press and hold A
again.
5. Confirm the password of the Wi-Fi network to which your phone is connected
and tap Confirm.
6. Connect your phone to the product's Wi-Fi hotspot (SmartLife_XXXX)
and return to the app. The product will now connect to the selected Wi-Fi
network.
7. Rename the product after it has been found and added.
Use (image D)
The product can be controlled from any location via the Nedis SmartLife app
The home screen of the app shows a control tile for each connected product
and/or group.
1. Tap the control tile to access the controls of the product.
1
2. Tap D
to switch the product on or off.
2
3. Tap D
to set an activity schedule.
3
4. Tap D
to set a countdown after which the product will switch on or off.
4
5. Tap D
to access the detailed settings of the product (or group).
4
The product can be connected to Google Home or Amazon Alexa to enable
speech control. See the detailed settings (D
more information.
4
The product can be connected to IFTTT to enable external conditions to
trigger the product. See the detailed settings (D
group) for more information.
4
See our support webpage to discover all possibilities of the Nedis
Smart Socket.
) is blinking slowly. If so, tap to confirm.
7
for 5 seconds and check
4
) of the product (or group) for
4
) of the product (or
8
Wi-Fi
®